You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

536 lines
23 KiB

# @(#)HISTORY 2.1.8.3
Changes as of 10/11/99
-- versions: TPCH 1.2.0a, TPCR 1.1.0a
-- Correction to segmented updates that was causing extra file to be
generated
-- Porting changes for DigUnix
Changes as of 08/28/99
-- versions: TPCH 1.2.0, TPCR 1.1.0
-- reduced parameter substitution range for Q18
-- added new option to specify location of dists file (-b)
-- added DBGEN option to suppress all output (-q)
Changes as of 08/16/99
-- versions: TPCH 1.1.0a, TPCR 1.0.1e
-- prevent "reuse" of original data in update files
-- correction to lint target in makefile.suite
-- removal of vestigal l_partkey predicate from 21.sql
-- reorder lineitem/order join in q5
-- removal of table aliases from 2.sql
-- randomize seeding of qgen RNG to close bug 52
-- correct possible round off error in segmented update files
-- corrected soft copy answer set for Q22
-- corrected percision of answer set for Q19
Changes as of 07/08/99
-- versions: TPCH 1.1.0, TPCR 1.0.1
-- WORKLOAD must be set to either TPCH or TPCR in the makefile
-- unneeded reference to part table removed from q21 template
Changes as of 06/04/99
-- version 1.0.1d
-- Restarted version numbering to match specification revisions for
TPC-H and TPC-R
-- Corrected answer set for for Q13
-- Corrected parameter substitutions for Q16, Q17, Q19, Q20, Q21, Q22
-- Corrected RNG initialization in qgen.c
-- added adhoc.c adhoc.h to code base to support randomized data sets;
currently disabled
-- replaced calls to UnifInt() row_stop with call to NthElement()
-- Corrected a problem that caused small negative money values to print as
a positive value
-- Simplication of PR_xxx macros
-- QGEN building correct parameter logs again
******************
* NOTE NOTE NOTE *
******************
Below this line the file refers to TPC-D which was retired in favor of
TPC-H and TPC-R. Since the new speicifications are numbered from 1.0.0
the program version was reset.
******************
* NOTE NOTE NOTE *
******************
Changes as of 01/05/99
-- version 2.0.1
-- added 1999 to the copyright notice
-- corrected C++ compilation problem
-- sub-select phrasing corrected in Q4, Q21, Q22
-- added support for segmenting update files (contributed by Larry Kemp, HP)
Changes as of 12/08/98
-- version 2.0.0
-- removed permute.h from clean target in makefile
Changes as of 11/17/98
-- version 2.0.0 Alpha 8
-- corrected o_custkey overrun bug
-- removed upper bound on -C command option
-- added static permute.h to distribution to match the specification
Changes as of 10/23/98
-- version 2.0.0 Alpha 7
-- removed references to DSS_SEED and SEED_TAG
-- minor query template cleanup
-- V2 answer sets added
-- correction to hd_sparse for SF > 300
-- added static declaration to row types in gen_tbl to fix update problem
-- permuted params to Q22
Changes as of 5/19/98
-- version 2.0.0 Alpha6b
-- removed trailing apostrophe from dists.dss nouns for Tandem loader
-- corrected mk_sparse() problem with alpha6
-- added 64b support for NCR/Metaware
-- corrected revision problem with 2.0.0.6
Changes as of 5/7/98
-- version 2.0.0 Alpha6
-- corrected generation of parent/child tables in parallel
-- renamed ORDER table to ORDERS table
-- revision of DBGEN synced with revision of 2.0 specification
-- portability changes to process termination provided by John Matzka
-- portability changes for Watcom C provided by Andrew Eisenberg
-- indentation of specifications/templates now matches
-- queries now include a consistant header format
Changes as of 4/28/98
-- version 2.0.0 Alpha5
-- NO RELEASE OF ALPHA 5 ; skipped to sync spec/DBGEN revision levels
Changes as of 4/6/98
-- version 2.0.0 Alpha4
-- corrected parallel table generation
-- minor corrections to query templates
-- portability changes for HP
Changes as of 3/24/98
-- version 2.0.0 Alpha3
-- include substitution parameters for Q22
-- correct substitution parameters for Q16 under AIX
-- include permute.h until unix/NT makefile fix
-- correct orderkey generation
Changes as of 3/20/98
-- version 2.0.0 Alpha2
-- correct runtime malloc error from bad INIT_HUGE macro
-- improve pseudo text distribution in comments
-- fix problem with parallelism of data gen
-- re-enable generation of parent/child tables
-- remove recombinaton code for parallel flat files
Changes as of 3/11/98
-- version 2.0.0 Alpha1
-- removed the TIME table
-- removed the need for seed files
-- made 1GB the validation database size
-- add pseudo text support in comments
-- correct character selection in a_rnd()
-- correct population of P_NAME
-- removed unclaimed variants
-- added new queries 18-22, replaced Q13
Changes as of 2/6/98
-- version 1.3.1
-- Revised 64 bit support to clean up bcd2_bin()and mk_sparse()
-- Add 64b support for NT
Changes as of 12/31/97
-- version 1.3.0
-- support for seed generation > 1TB (data gen still to be tested)
-- rework of 64b support
-- added bcd support for subtraction, comparison, modulo
-- added 1998 to the copyright notice
-- clarified comments in dists.dss
-- corrected substitution problem in Q11
-- standardized fopen() error messages with OPEN_CHECK()
-- introduced PATH_SEP in config.h to allow changes in path separators
Changes as of 12/15/96
-- version 1.2.0
-- corrected typos in queries 8a, 8c, 8d, 11a, 12F and 14F, 17a
-- added variant 15c
-- defined MAX_SCALE and MIN_SCALE; issued error messages for SF > 1000
since implementation is incomplete
-- seed file generation can now be resumed with dbgen -R <n> ...
-- corrected slight compile bug under Solaris 2.5.1
-- documented compile problems under SunOS
Changes as of 8/1/96
-- version 1.1.0D
-- included new variants for queries 8 and 15
-- re-introduced answer sets in the source tree
Changes as of 5/1/96
-- version 1.1.0C
-- unified version numbering of DBGEN and QGEN
-- updated BUGS list
-- removed FAQ from soft appendix; web site will keep the current
version of the FAQ
-- added 1996 to the copyright notice
-- corrected bug in PR_DATE macro; NO CHANGE TO DATA SET
-- properly initialize param values for cleaner logging
-- adjusted output format of Q11 partam to allow scaling to 1TB
-- corrected typos in variant 14c
-- corrected data type for YEAR in variant 8c
-- corrected typos in variant 10a
-- added variant 8d
Changes as of 1/23/96
-- qgen version 1.1.0B
-- include support for ANSI semantics
-- improved patch for seed sensetivity
Changes as of 1/23/96
-- updated BUGS list
-- dbgen version 1.1.0A
-- patch to limit BCD2 fields to 12 characters for columnar output
-- qgen version 1.1.0A
-- patch to fix the "unknown flag" problem
-- patch to fix the seed sensetivity problem
Changes as of 12/19/95
-- updated BUGS list
-- dbgen version 1.1.0
-- upped default value of MAX_CHILDREN to 1000
-- corrected naming of detail tables in incremental load
-- corrected range delete output
-- forced delete files to truncate existing files
-- removed fixed size tables from seed generation
-- corrected overflow problem with large scale seed generation
-- allow date generation as MM-DD-YY based on config.h #define
-- correct truncation problem with columnar output in PR_VSTR()
-- added support for Windows NT
-- added PLATFORM macro to makefile, removed platform defines from
config.h
-- removed MAX_CHILDREN define from config.h (set to 1000 in dss.h)
-- qgen version 1.1.0
-- correct SET_OUTPUT macro to TDAT
-- use %ld in output for q17; portability
-- add support for SQLSERVER database dialect
-- add support for SYBASE database dialect
-- adjust parameter ranges for Q1, Q3, Q6
-- add -T/-t option to usage summary
-- added support for Windows NT
Changes as of 09/01/95
-- qgen version 1.0.1
-- formalized version numbering
-- -p now generates correct query permutations
-- added separate verion number for qgen
-- corrected Q3 substitution problem
-- updated permissible range for Q10
-- corrected rowcount_dflt and the MAX row indicator (-1)
-- expanded param logging to include all possible parameters
-- allowed qgen's -d option to be used at all scale factors
-- made parameter substitution permutation-independent
-- added qgen suppport for END_TRAN (-E) and DFLT_NUM (-N)
-- correct handling of :n directive
-- added more complete explanation of QGEN to README
-- rename of random to rndm, for portability
-- dbgen version 1.0.1
-- formalized version numbering
-- inclusion of SF=1 seed file
-- correct typo in usage() update example
-- patch to driver.c to allow correct updates
-- documentation change to README to clarify seed/stage/update
intereaction
-- corrected minor glitch in "open failed" error msg in print.c
-- added missing line continuation to makefile.suite
-- seed files are now based on scale factor and number of generators
-- seed files now hold seeds for one "step" of a given build
-- clean up of parallel load routines
-- inclusion of faster seed generation routines from Susanne Englert
-- removed the -E(xisting) option
-- assure proper scaling of O_CUSTKEY
-- corrected default update percentage
-- proper handling of child tables with '-O f'
-- removed seed files from the distribution
-- modified rpb_routine() to limit contribution of partkey in
retailprice
-- added '-S(tep)' option to allow multi-stage loads
-- roll in of 32 bit speed_seed routines from Dick Shelton
-- miscelaneous typo corrections in the documentation
-- cleanup of usage output
Changes as of 05/08/95
-- version 1.0
-- add Teradata defines to tpcd.h for QGEN
-- add :c to query templates for database CONNECT syntax
-- add examples of DBGEN and QGEN usage to README
-- add -T option to qgen to allow time able usage
-- query template names only requre .sql suffix, rest is arbitrary
Changes as of 03/13/95
-- version 9.1
-- surround DBNAME with ifndef in config.h
-- remove -DDBNAME from makefile.suite
-- sync varchar handling with 9.1 draft
Changes as of 02/21/95
-- version 9.0a
-- fixed bug in qgen that incorrectly included rnd.h
-- included revised DDL with changes for char/varchar and l_quantity
-- updated DBGEN help message to include new single table options for
order/lineitem and part/partsupp
-- included handling for multi-set seed files TPCDSEED.xxx
-- generated seeds up through 400GB; headed to 1TB!
-- ANSI lint cleanup; more needed
-- UF2 now defaults to key lists; use "-O r" to generate key ranges
also note, this routine this routine does NOT use the BCD2_*
routines. As a result, it WILL fail if the keys being deleted
exceed 32 bits. Since this would require ~660 update iterations,
this seems an acceptable oversight
Changes as of 01/19/95
-- version 9.0
-- allowed command line seeding of RNG for QGEN
-- order and number of params in QGEN now matches
presentation in spec
-- fixed bug in time table format of O_ORDERDATE
-- changed l_QUANTITY to FLOAT in dss.ddl
-- reworked QGEN options to be more useful
-- allowed creation of sparse keys beyond 32 bits (for 1TB)
-- removed unused '#ifdef' and associated code
-- allowed independent generation of master/detail tables
(eg, order/lineitem)
Changes as of 12/06/94
-- version 8.6
-- fixed renaming of flat files for child tables
-- various documentation fixes
-- added naming convention section to Porting.Notes
-- added -DIBM flag to config.h
-- synced up QGEN with draft 8.1
Changes as of 10/25/94
-- version 8.5a
-- corrected bug in columnar output of pr_supp
-- added pr_drange to generate a list of order keys to be
deleted instead of generating SQL
-- added '-O d' to generate range delete as SQL
-- updated default values for QGEN to sync with spec 8.1
-- corrected MK_SPARSE to reflect groups of 8
-- corrected a bug in o_orderstatus
-- regenerated seed files for SF in [1,10]
-- ANSI cleanup (primarily function declarations)
Changes as of 10/11/94
-- version 8.5
-- remove deletes/inserts to other than order/lineitem
-- increased cardinality for part.type part.container
-- '-r' argument is now integer; percentage in basis points
-- initial roll-in of new update scheme
-- added BBB comments to supplier table
Changes as of 9/27/94
-- version 8.4
-- all money calculations now use integer math. This should
bring everyone's data sets into exact aggreement.
Changes as of 9/21/94
-- version 8.3b
-- fixed handling of MAX_STREAM
-- added floor function to RPRICE bridge
-- misc lint cleanup (type fixes, new prototypes, etc.)
-- MONEY format becomes lf for DOS
-- further cleanup of PR_VSTR and its length argument
-- change to parameter generation for Q6 to allow for float
discount
Changes as of 9/15/94
-- version 8.3a
-- isolated MONEY format for Unisys (Lf) using DOS
-- make sure all arguments to MAKE_MONEY were double's
-- rolled in NEW_PTEXT to allow Berni to experiment
Changes as of 9/12/94
-- version 8.3
-- added -T n and -T r to usage to match getopt() and README
-- changed PR_MONEY to remove leading blanks
-- included revised DDL from Berni
-- included some MVS portability fixes in re malloc.h
-- cleaned up error messages in qgen and made #define ofp usage
universal
-- additional DOS portability changes
-- added {c,a}len to provide specific length for columnar
output of varchar
-- added PR_VSTR to handle varchar printing under MVS
-- fixed bit masking in a_rnd and cleaned up prototype match
with V_STR
-- PR_MONEY now used %Lf
-- added revised pseudo text under NEW_PTEXT ifdef for
experiments
Changes as of 9/09/94
-- version 8.2
-- l_discount and l_tax are now fractional (per teleconference)
-- money calculations moved to scaled integer math to clean up
answer sets
-- changed PR_FLT() to PR_MONEY to clarify usage
-- portability changes for SYBASE: dbname --> db_name
STATUS --> DBGEN_STATUS
-- added nations2 to dists.dss to handle qgen needs for now
-- reintroduced #ifndef DOS
-- reintroduced U2200 define to control kill_load()
-- broke out nation and region separately in -T option
-- updated dss.ddl based on mail from Berni
Changes as of 8/31/94
-- version 8.1
-- scaling for clerks needed to be 1000 (was 100)
-- added qgen parameter for scale
-- changed qgen parameter from s)tream to p)ermutation
-- synced qgen paramter values with 8.0 spec
-- corrected duplications in dists.dss
Changes as of 8/24/94
-- version 8.0
-- added sparse keys to lineitem/order
-- added varchar generation for comments/addresses
-- added variable lineitems/orders
-- removed ifdef for normalized code_tables
-- included code for parameter generation and template->EQT
routines
-- updated README and Porting.Notes to reflect QGEN
-- included DDL and RI examples from Berni
Changes as of 6/15/94
-- version 7.0b (numbers now match spec revsion)
-- rework of code tables to properly map nation/region; when
compiled with -DCODE_TABLES distributions are taken from
code.dss and two additional fields are generated for
customers and suppliers, [cs]_ncode and [cs]_rcode,
immediately following [cs]_region
-- replaced ifdef's around DEAD_DATA with opposites. DEAD_DATA
is now the default
-- worked through code to see that it conformed to 7.0
specification
-- adjusted scale factors/rowcounts for 1 GB == sf1
-- brought help message in line with current code
-- fixed order per customer at 10
-- make suppkey scalable in lineitem/partsupp
Changes as of 4/25/94
-- version 1.5
-- added the customers with no orders; Compile with -DDEAD_DATA
to activate the change.
-- added the code table for nation and region;
Compile with -DCODE_TABLES to activate the change.
Changes as of 3/17/94
-- version 1.41
-- completed implementation of JULIAN_DAY after talks with Berni
-- misc cleanup in usage/README files
-- removed all tabs and capped line length at 75
-- added -n option to allowing naming of inline-loaded database
Changes as of 3/16/94
-- version 1.4
-- prottyped julian day/month for query re-write work. Compile
with -DJULIAN_DAY to enable
-- removed gen_times() from driver.c
-- added VMS ifdef to config.h to clean up fork/signal issues
-- added ICL ifdef to config.h to clean up getopt() issues
-- changed header file references to config.h from machine.h
Changes as of 3/2/94
-- version 1.31
-- corrected format of C_NAME to match S_NAME and O_CLERK
-- re-allowed fractional scale factors < 1 (updates not
contiguous)
-- added DSS_CONFIG environemnt variable
-- reworked read_dist() to look for DSS_DIST in DSS_CONFIG
-- updated the README file
Changes as of 2/16/94
-- version 1.3
-- added command line options for parallel load and data set
expansion
-- changed dists.dss delimiter to | for portability
-- limited scale factors to integer values
-- added command line option for seed file generation
-- added all seed files to distribution for SFs 1 - 10
-- moved machine.h to config.h and added MAX_CHILDREN define
-- added 'f' flag to options to allow renaming of output files
-- added generation of SQL delete statements to match updates
(Note: updates are still single-threaded; -C is cleared
by -U)
-- corrected field sizing in dsstypes.h typedefs to match v 6.4
-- update percentage default set to 1%
Changes as of 12/3/93
-- version 1.2
-- added command line option to adjust update percentage
-- fixed update gneration for proper primary key ordering
-- renamed UUSR/PRC to RUSSIA/CHINA in dists.dss
-- cleaned up phone number generation to be consistant regard-
less of order of evaluation
-- adjusted size of lineitem comment to bring data in line with
100 MB == SF=1
Changes as of 10/15/93
-- added command line option for update data creation
-- miscelaneous porting and cleanup changes
-- reworked table generation to allow reuse for updates
-- added comment field to tdefs structure
-- added load_state and store_state to sync data gen and
update gen
Changes as of 7/26/93
-- combined loader and header stubs in load_stubs.c
-- separated Revision History (this file) from README
-- simplified makefile
-- removed redundancies from colors distribution
-- added getopt() for portability
-- created Porting.Notes
-- adjusted scaling rules
-- added help option to the command line
Changes as of 2/26/93
-- combined all typedefs in one header: dsstypes.h
-- combined flat file generation in print.ec
-- combined typedef population in build.ec
-- added -P to control rowcnt scaling (P for percentage)
-- added -D option for Direct data generation and added
appropriate hooks in tdefs[] structure
-- added -F option for flat file generation
-- reused -T option (use -P 0.1 to build test size database)
now accepts suboptions c,o,p,s for single table builds.
-- dropped -M option (scaling is now by rowcount)
-- added -O option for optional controls. Currently defined:
-O t -- generate optional time table a join fields in
order/lineitem
-O h -- generate headers for flat file output
-O m -- generate fixed column-length output
-- removed dynamic memory allocation, redundant calls to
UnifInt, etc to improve performance
Changes as of 1/12/92
-- julian() changed to handle orders->orderdate correctly
-- rflag distributions corrected in dists.dss
-- sea, gold removed from color distribution to clean up substring
problems
-- part->number and supplier-> adjusted for 1-based indexing
-- time->day changed to be day of month, not day of year
-- t.week changed to be week in year, not day of week
Changes as of 11/18/92
-- checked line length and tab for transmission
-- another chapter in the portability wars. added #include
"machine.h" to dss.h (which is included by everyone else). Any
machine particular porting changes should go here.
-- fixed fixed-field formats to prevent double printing
-- expanded PR_FLT formats to %010.2
Changes as of 10/21/92
-- added fixed format and column header handling; users of headers
will have to define the header functions to be called in
int (*tdefs.header)()
Changes as of 10/09/92:
-- added ansi prototypes and recompiled with gcc -ansi. users may
need to change the CC definition in the makefile and the contents
of CFLAGS to reflect their particular ansi compiler.
-- replaced all int references with long
-- replaced all float references with double
-- found and fixed odate/julian problem TS mentioned in 10/09 phone
call
Changes as of 9/09/92:
-- Park/Miller random number generator included
-- clerk scaling changed to 100 * scale
-- parts.name always built from 5 selections from colors set
-- test scaling changed to ~60MB (TEST_SCALING == 10)
-- logarithmic scaling removed
-- mfgcost removed and retail/supplier cost bounds adjusted
-- agg_str memory leak fixed
-- independent RNG streams on a per column basis
This is the revised data generator for DSS.
The rewrite tried to accomplish three things: (1) identify and isolate
all the implicit assumptions about limits, bounds, ranges, distribu-
tions, etc.; (2) standardize the way any given table was generated/
printed to ease understanding and maintenance; (3) bring the generator
in line with the current work of the committee and the excellent spec
the Indira put together; (4) provide an easy way to adjust distribu-
tions, string contents and to facilitate experimentation to get a
better idea of the impact of data population changes.
The files included are:
driver.c ------- main and the calling routines for the generators
dist.c ------- should really be named dss_util.c; misc routines
customer.c ------- generation and print routines for customer table
orders.c ------- "" "" order table
parts.c ------- "" "" parts/partsupp
suppliers.c ------- "" "" suppliers table
time.c ------- "" "" time table
customer.h ------- associate header files; contain structure
definitions
dss.h dss.h holds the large number of assumptions and
orders.h values that have been used as IFDEFs.
parts.h
suppliers.h
time.h
dists.dss ------- string selections and weights; used to build
distributions
Running make will create an executable (using the compiler flags in
CFLAGS, the ld flags in LDFLAGS and the libraries in LIBS [-O, -s,
and -lm by default]) which will create flat files suitable for dbload.
t